Chart a path to any field in a manifest.

yqr is a jq-style filter for YAML. Point it at a manifest file, a kubectl get -o yaml dump, or a Helm-rendered bundle, and it walks straight to the field you asked for — as a value, not as JSON you have to decode back.

the filter .spec.volumes[0].secret.defaultMode

apiVersion: v1
kind: Pod
metadata:
  name: web
spec:
  volumes:
    - name: tls
      secret:
        secretName: web-tls
        defaultMode: 0640

default

$ yqr '.spec.volumes[0].secret.defaultMode' pod.yaml
0640

--normalize

$ yqr --normalize '.spec.volumes[0].secret.defaultMode' pod.yaml
640

Kubernetes spells file permissions in octal — defaultMode: 0640 on a Secret or ConfigMap volume. Read that field through yqr and the value comes back exactly as written, because yqr never re-typed it in the first place. Only if you opt into the classic --normalize pipeline is the leading zero lost: 640 is a different number.

installed paths

Where the binary actually lives

Install from crates.io with cargo install yqr, or build any of the paths below from a source checkout.

On your machine

cargo install yqr

Pulls the published crate to ~/.cargo/bin/yqr — keep that directory on PATH so plain yqr resolves from any shell, including one already piping kubectl output.

cargo build --release

Building from source instead? The binary lands at target/release/yqr (or cargo install --path . to put a local checkout on PATH).

Inside a container image

/usr/local/bin/yqr

Build it in a multi-stage Dockerfile and copy just the binary into the runtime stage — no Rust toolchain, no source tree, in the image that actually ships.

Byte-preserving reads are the default. Untouched nodes come back as their original source bytes — comments, quoting, indentation, and line endings survive, and the identity filter reproduces the input byte-for-byte, no flag required.

$ yqr '.' pod.yaml

Pass --normalize (-N) to opt into the classic, re-serializing pipeline (comments dropped, scalars canonicalized). --engine <name> selects which backend parser performs the byte-preserving read (default noyalib); an unknown engine name is rejected up front:

$ yqr --engine bogus '.' pod.yaml
yqr: io error: unknown engine "bogus" (available: noyalib, skald)

See the runnable demo for a seven-step walkthrough of navigation, iteration, pipes, raw output, and fidelity mode.

It edits, too — and only the bytes you target. Give it a mutating filter and yqr changes just that node, leaving every other byte — comments, indentation, quoting, key order — untouched, or refuses. Replace a value with =, append to a block sequence with +=, add a key, or drop an entry with del(…):

$ yqr '.spec.replicas = 5' deploy.yaml
$ yqr '.spec.ports += 9090' deploy.yaml
$ yqr 'del(.metadata.labels)' deploy.yaml
$ yqr 'del(.spec.template)' deploy.yaml   # a nested block, closed up cleanly

del removes multi-line and nested block entries as well as single-line ones, closing up the gap and leaving every surviving byte identical; deleting the only entry of a block, or an item of a flow collection ([a, b]), is refused with a clear message. Add -i (--in-place) and the file is rewritten atomically — a git diff touches only the line you changed. An edit that would restructure the document is refused (exit 5) rather than emitted, and under -i the file is left untouched.

$ yqr -i '.spec.replicas = 5' deploy.yaml
$ git diff deploy.yaml   # one line

two ways to run it against a cluster

From an operator's shell, or from inside the image

Piped from kubectl

Standard operator loop: dump a resource as YAML, pull one field out of it, move on.

$ kubectl get pods -o yaml | yqr -r '.items[] | .metadata.name'

One pod name per line.

$ kubectl get pod web-0 -o yaml | yqr -r '.spec.containers[0].image'

The primary container's image, unquoted.

$ kubectl get pod web-0 -o yaml | yqr -r '.spec.initContainers[]? | .image'

Init container images when the pod has any — the trailing ? keeps pods with none from erroring the pipeline.

Inside a container image

Bake the binary in, then use it in an init container to read a mounted manifest or ConfigMap before the main container starts.

# -- build --
FROM rust:1.97-slim AS build
WORKDIR /src
COPY . .
RUN cargo build --release

# -- runtime --
FROM debian:bookworm-slim
COPY --from=build /src/target/release/yqr /usr/local/bin/yqr
ENTRYPOINT ["yqr"]

$ yqr -r '.data.enableBeta' /config/values.yaml

Read a flag out of a mounted ConfigMap and hand it to the next step — a common init-container job.

beyond the cluster

It's not just Kubernetes

Anything that's YAML takes the same filters. Three more places yqr earns its keep.

CI/CD pipelines

GitHub Actions workflows are YAML. Audit what a job actually runs without opening the file — these two ran against this repo's own ci.yml.

$ yqr -r '.jobs.test.["runs-on"]' ci.yml

ubuntu-latest — bracket syntax reaches keys a bareword can't spell, like runs-on.

$ yqr -r '.jobs.test.steps[1].with.toolchain' ci.yml

1.97 — confirm the pinned Rust version without scrolling past the cache step.

Docker Compose

Check what a compose file is about to pull and expose before you run it.

$ yqr -r '.services[] | .image' compose.yaml

yqr-demo:latest, postgres:16 — every image referenced, one per line.

$ yqr -r '.services.web.environment.LOG_LEVEL' compose.yaml

debug — one config value, no grep.

Ansible playbooks

A playbook is a YAML list of plays — walk it like any other sequence.

$ yqr -r '.[0].tasks[] | .name' playbook.yml

Install nginx, Start nginx — every task in the first play, at a glance.

$ yqr -r '.[0].hosts' playbook.yml

web — which hosts that play targets.

further afield

Three more, shown in full

Same grammar, different files — this time with the source shown, so nothing here has to be taken on faith.

OpenAPI specs

An OpenAPI document is plain YAML. Point yqr at it to pull a specific operation's details out of a spec someone else wrote, without loading it into an editor.

paths:
  /widgets/{id}:
    get:
      summary: Get a widget
      responses:
        "200":
          description: OK

$ yqr -r '.paths.["/widgets/{id}"].get.summary' openapi.yaml
Get a widget

Path keys have slashes and braces, so a bareword can't spell them — bracket syntax reaches them anyway, the same way .["runs-on"] did for the CI workflow above.

$ yqr -r '.paths.["/widgets"].get.responses.["200"].description' openapi.yaml
OK

Status codes are string keys, and an unquoted 200 in a filter would try to read a number. Bracket syntax reaches the string key "200" exactly as the spec wrote it.

Prometheus alerting rules

Alerting rules are a YAML list of groups, each holding a list of rules. Reading one back tells you exactly what will page someone, and at what threshold.

groups:
  - name: api-slos
    rules:
      - alert: HighErrorRate
        expr: rate(http_requests_total{status="5xx"}[5m]) > 0.05
        for: 10m
        labels:
          severity: page

$ yqr -r '.groups[0].rules[] | .alert' rules.yaml
HighErrorRate
HighLatency

Every alert name in the first group, without reading through a file's worth of PromQL to find them.

$ yqr -r '.groups[0].rules[0].expr' rules.yaml
rate(http_requests_total{status="5xx"}[5m]) > 0.05

The exact expression for that alert — useful when you just need to confirm the number that pages someone, not re-read the whole rules file.

Application config

Most services ship a YAML config file alongside the binary — database targets, ports, feature flags. yqr reads it the same way it reads anything else.

database:
  host: db.internal
  port: 5432
featureFlags:
  newCheckout: true
  betaSearch: false

$ yqr -r '.database.host' application.yaml
db.internal

Confirm which database an environment's config actually points at before you run a migration against it.

$ yqr -r '.featureFlags.newCheckout' application.yaml
true

Read a single feature flag's value straight out of the file that ships with the deploy, instead of grepping for it.

filter grammar

What yqr can walk today

yqr is at milestone M0. This is the whole grammar — every recipe on this page is built from it.

Filter	Meaning
`.`	Identity
`.foo`	Field access
`.a.b`	Nested field access
`.[n]`	Array index (`.[-1]` counts from the end)
`.[]`	Iterate sequence elements / mapping values
`a \| b`	Pipe
`f?`	Suppress runtime errors from `f` (e.g. iterating a field that turns out to be missing or the wrong shape)

Not yet available: select(), map(), keys, arithmetic, and object/array construction. Reach for kubectl's own -o jsonpath or a grep in the meantime if a recipe needs one of those.